Pace TDC787X, Руководство оператора

Страница: 17 / 48

15
OPERATING YOUR SET-TOP
Turning your set-top on and off
After you have connected your set-top to the wall AC outlet (and switched this outlet ON, if it has a switch), the
light around the
POWER
button on your set-top’s front panel should be red.
Wait for a few seconds, then press the
POWER
button on the front panel of your set-top to turn it on. The light
around the
POWER
button goes green, to show that your set-top is on.
If the light around the
POWER
button is neither red nor green, there is a problem (see page 37).
To turn your set-top on or off at any time, press the POWER button on its front panel or the POWER button on
your remote control (first making sure your remote control is set to control your set-top).
Never turn off your set-top by simply disconnecting it from the power supply. If you need to disconnect your
set-top, first stop any recording. Then turn off your set-top by pressing the
POWER
button on its front panel
or on your remote control, so that the light around the
POWER
button goes red. Then wait 60 seconds before
disconnecting your set-top from the wall AC outlet.
Power Saving: To save power and money, and to reduce greenhouse gas emissions, turn off your
set-top, using the POWER button, when it is not in use.
NOTES
IMPORTANT: Unless there is a lightning storm or you will be away from your home for a long time, do not
unplug your set-top from the wall AC outlet (or do not switch it off there, if the outlet has a switch). Your set-
top cannot be updated with new features, through the cable, if it is disconnected from the AC power supply.
Depending on your set-top’s settings, if you switch your set-top off, any TV that is attached to your set-top’s
POWER OUTLET may also turn off. For more details, see page 36.
The light around the button
changes from red to green.
To turn your set-top on,
press the
POWER
button.
Front panel display, showing
the time (see page 36)