Pace TDC780X, Руководство оператора

Страница: 8 / 48

6
L
S-VIDEO
DIGITAL
AUDIO OUT
OPTICAL
AUDIO OUT ETHERNET
VIDEO OUT
Pr Pb Y
COMPONENT VIDEO
1394
TO TV
CABLE IN
SATA
IR RECEIVE
IR TRANSMIT
+5V DC
500mA max.
AUDIO
OUT
R
POWER OUTLET FOR TV ONLY
120V AC 60Hz 4.2A MAX.
POWER INPUT
120V AC 60Hz
DOUBLE INSULATED
L
S-VIDEO
DIGITAL
AUDIO OUT
OPTICAL
AUDIO OUT ETHERNET
VIDEO OUT
Pr Pb Y
COMPONENT VIDEO
1394
TO TV
CABLE IN
SATA
IR RECEIVE
IR TRANSMIT
+5V DC
500mA max.
AUDIO
OUT
R
POWER OUTLET FOR TV ONLY
120V AC 60Hz 4.2A MAX.
POWER INPUT
120V AC 60Hz
DOUBLE INSULATED
SAFETY INFORMATION (cont.)
Safety aspects of connections
Full details of the rear panel are on page 8.
Connecting
Do not connect your set-top (or any other equipment such as a TV or VCR)
to the power supply until you have properly connected all the other cables.
Your set-top operates with a 120 V AC, 60 Hz power supply.
Do not connect your set-top to any supply other than this.
This set-top is equipped with a two-wire power cord, with a polarized plug
at one end. The other end of the cord is fitted with a polarized connector,
which is shaped such that it can be fitted only one way into the power
input connector of your set-top. Connect this end first, before inserting the
polarized plug into the wall AC outlet.
Disconnecting
Disconnect your set-top from the power supply before you disconnect any
other equipment from its rear panel.
The only way to disconnect your set-top from the power supply is to remove
the power cord from the wall AC outlet. Therefore, you must install your set-
top near to the wall AC outlet, which should be easily accessible.
If you are in any doubt about the power cord, its plug, or its connection,
consult a qualified electrician.
The
CABLE IN
connector is designed for
connection to a cable network only.
You must not connect any other equipment,
such as a VCR, to this input.
POWER INPUT
The model number, serial
number and electrical
rating of this set-top are
on a label on its base.
The
POWER OUTLET
plug is designed only for connection to the AC
power cord for a TV . The maximum power it can supply is 500 watts.
Do not connect any equipment that uses more than 500 watts, or any non-
TV equipment such as a toaster or hair dryer.