Pace MBT250, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 12

6
12. Press and release the Tip Temperature Set Key. The Digital Readout will
AUTOMATIC SHUTDOWN
10. The system enables the Automatic
Shutdown feature only when the
Automatic Setback feature is
enabled. No additional steps are
necessary.
CHANNEL SELECTION
11. The Channel 1 LED is now lit
signifying that Channel 1 is ready for
calibration. Perform steps 12
through 21 to calibrate. As channels
change, repeat these steps for each
channel.
NOTE
All temperature limits are stored in
system memory in degrees F.
LOWER TEMPERATURE LIMIT
SETPOINT