24
usInG tHe setuP menu
THE.SETUP.MEnU
In the
setup
menu you can find important
information concerning the reception of channels .
Within the Setup menu you can change the settings
of your set-top box so as to optimise the reception
of channels .
As you press the
D U
buttons to move the highlighting
up or down the
setup
menu, additional information
appears to the right of the menu .
Each of the screens you can display from the
setup
menu is described briefly below .
CI-MODULE
You may need to display this screen and supply the
information on it if a Customer Advisor asks you to .
See also page 25 .
SYSTEM
You may need to display this screen and supply
the information on it if a Customer Advisor asks
you to . From the
system
screen you can display
the
Version number
screen by pressing the
blue
button . See also page 25 .
SOFTWaRE.UPDaTE
Please see page 33 .
anTEnna
On this screen you can select the method you have
used to connect your set-top box to your satellite
dish(es) . See also page 25 .
TV.SETTInGS
This menu allows you to specify the type of
standard-definition (SD) TV you have connected
to your set-top box . You can also specify high-
definition (HD) output resolution settings, and
Lip Sync settings . Making the correct settings on
these screens will ensure you have the best picture
available . See also pages 26 and 27 .
DIGITaL.aUDIO.OUTPUT
You can use this screen to automatically send
Dolby Digital audio (if it is available for the current
programme) to any equipment you have connected
to the
oPtICAL AuDIo out
connector . See also
page 28 .
FaCTORY.RESET
Please see page 28 .
USInG.THE.SETUP.MEnU
You use the
setup menu
to:
•
view CI-module information;
•
view system information;
•
carry out a software update (see page 33);
•
change antenna settings;
•
change TV settings to make your set-top box
compatible with your TV;
•
change the digital-audio output setting;
•
carry out a factory reset .
