Pace DC700X, Руководство по обслуживанию и установке

Страница: 51 / 64

49
Setting Hard Disk Sleep Mode
If the set-top is in Hard Disk (Hdd) Sleep Mode, any attached external hard disk will enter sleep
mode when you switch off the set-top (that is, when the front-panel
POWER light is red and the
set-top is in standby). This is an energy-saving feature.
If you have set up the set-top to make recordings, the set-top and external hard disk will switch on
to allow those recordings to be made, even if this “Standby Sleep Mode” feature is on (set to “YES”).
However, it will take a little more time to do so, compared with having Standby Sleep Mode off (set
to “NO”).
1. If you have not done so already, put the set-top into “user settings mode”, as described on
page 41. Press the
U
or
D
button on the remote control and highlight Hard Disk Sleep Mode in
the PACE USER SETTINGS menu.
2. Press the
R
button. The Standby Sleep Mode menu, shown right, appears on the TV screen.
3. If you want to change the setting, press
U
or
D
. Press the SELECT button to confirm the
choice and change to the new setting.
4. Press the
L
button. The PACE USER SETTINGS menu reappears.
To continue making the settings, see the next section.
MAKING USER SETTINGS (cont.)
Standby Sleep Mode
>YES
NO
> shows current setting, as does
a lighted MESSAGE light