Pace DC700X, Руководство по обслуживанию и установке

Страница: 50 / 64

48
3 If you wish to reset all the Closed Caption settings to their default values (mainly Auto), press the
D
button to highlight “Reset to Defaults” in the menu, then press
SELECT
.
4. When you have made all the changes you want to make, press
L
twice to re-display the PACE
USER SETTINGS menu.
Making Front-Panel Settings
You can use the Front Panel Settings menu to set the brightness level of the front-panel lights (but
not the POWER light) when the set-top is being used (“Viewing TV” level) and when it is switched
off (“Standby” level).
The remaining setting “IR Receiver” is not applicable to this product, and cannot be changed.
1. If you have not done so already, put the set-top into “user settings mode”, as described on
page 41. Press the
U
or
D
button on the remote control and highlight Front Panel Settings in the
PACE USER SETTINGS menu.
2. Press the
R
button. The Front Panel Settings menu, shown right, appears on the TV screen.
3. Press the
U
or
D
button to highlight “Standby Level” or “Viewing TV Level” as required.
4. Use the
SELECT
button to choose the setting you want (the setting changes each time you
press
SELECT
): “Low”, “Std” (Standard) or “High”. Look at the dimming and brightening of the
front-panel lights while you are making the settings, to see the effect of your selections.
5. When you have made all the changes you want to make, press
L
to re-display the PACE USER
SETTINGS menu.
MAKING USER SETTINGS (cont.)
Front Panel Settings
Standby Level : Std
Viewing TV Level : High
IR Receiver : NA