Pace DC700X, Руководство по обслуживанию и установке

Страница: 35 / 64

33
CONNECTING THE EQUIPMENT (cont.)
About Setup I: Combining all the equipment for a component-video HDTV
This setup shows the best use of cables and connectors if the HDTV and the DVD player have component video connectors.
The audio output from the VCR goes to the home theater receiver (via cable 10) to enhance the sound during playback. •
Although the video and audio from the set-top to the VCR could be looped through the home theater receiver, it is not necessary to •
do this and it requires more cables.
If there is no home theater receiver in the setup, the audio from the set-top, VCR and DVD player must all go to the HDTV (assuming •
it has enough audio input connectors on it).
RF Cable TV
Y, Pb, Pr Video
DC700X
set-top
Home
Theater
HDTV
Cable TV
RF
Cable Wiring Diagram I
A
&
V
S-Video
VHS
Recorder
Stereo Audio
DVD
Player
Digital Audio
Digital Audio
Composite Video
NOTE
The diagram shows a video path from
the set-top to a VCR to allow recording
to the VCR. It shows a video path from
the VCR to the TV to allow playback of
videos. Video signals fed through a VCR
may be affected by copyright protection
systems, which can cause picture
distortion on the TV.
Do not therefore use a path through a
VCR to watch the set-top programs.
Use the component video path or an
alternate
direct video path from the set-
top to the TV. Remember to select the
correct input on the TV.