Pace ARM-EVAC 150, Руководство по эксплуатации

Страница: 10 / 13

©2018 PACE Inc., Vass, North Carolina. All Rights Reserved
www.paceworldwide.com Page 7
Filter Replacement & Spare Parts
PACE Fume Extraction Systems are equipped with filters designed to capture particulates, noxious gases and
odors from the air being filtered. Regular monitoring of exhaust fume from the unit is recommended. Over time,
the particulate filters will become clogged causing restriction of air flow through the system and/or the capacity
of the gas filter will be reached causing a reduction in the ability to continue neutralizing and adsorbing noxious
gases or odors.
Do not attempt to clean any PACE fume extraction filters for reuse. Cleaning the filters can severely damage the
filter media, ruining
the filter’s performance. This will result in unfiltered, contaminated air being returned to the
working environment. Unfiltered air can also damage the fan assembly.
To ensure the highest level of performance, use only genuine PACE replacement filters in your PACE Fume
Extraction System.
Arm-Evac 150 Pre-Filter P/N 8883-0112-P5
The Pre-Filter removes coarse particles from the air. In general, the Pre-Filter should be changed on a monthly
basis. However, depending on your particular process, the filter may need to be changed more or less
frequently. A visual inspection on a weekly basis is recommended.
Replacing the Pre-Filter:
1. Remove the Filter access cover (lid)
2. Remove the old Pre-Filter
3. Install a new Pre-Filter.
4. Attach lid.
5. Dispose of used Pre-Filter properly
Arm-Evac 150 General Purpose Combo Filter P/N 8883-0932-P1
The General Purpose Combo Filter cartridge removes particulates from the air and captures noxious odors &
gases. In general, the filter cartridge must be changed every 6 to 9 months. However, depending on your
particular process, the filter cartridge may need to be changed more or less frequently.
Replacing the Filter cartridge:
1. Remove the lid.
2. Remove the old filter cartridge.
3. Install new filter cartridge.
4. Install a new Pre-Filter.
5. Attach lid
6. Dispose of old filters properly.