©2005 PACE Inc., Annapolis Junction, Maryland
Page 14 of 17
All Rights Reserved
Using the Optional Instant Setback Cubby
(Part Number 6019-0071-P1)
The HW 50 and TW 50 can be used with the optional Instant
Setback Cubby. When the TD-100 handpiece is inserted into
the Cubby, the system will automatically go into the Setback
Mode after 45 seconds of non-use. Once the Handpiece is
removed from the Cubby, it will return to normal operation.
Corrective Maintenance
Handpieces
Please refer to the TD-100/MT-100 Handpiece Manual for the maintenance procedures.
Power Source
Refer to the table below. Most malfunctions are simple and easy to correct.
Symptom Probable
Cause
Solution
Blown Fuse
Replace the fuse (located in the AC Receptacle
Fuse Holder) with one of the same rated value.
No power to
system
No Supply Voltage
Verify that the AC outlet is active.
Defective Heater
Change Tip Cartridge. Refer to the TD-100/MT-
100 Handpiece manual for the maintenance
procedures.
Handpiece will
not heat
Power Source
Malfunction
Contact PACE
Power Source Corrective Maintenance
Replacement Power Modules
Description PACE
Part
Number
Power Modules
5/Green 1207-0362-01-P1
5.5/Blue 1207-0362-02-P1
6/Orange 1207-0362-03-P-1
6.5/Gold 1207-0362-04-P1
7/Red 1207-0362-05-P1
7.5/Purple 1207-0362-06-P1
8/Black 1207-0362-07-P1
8.5/Silver
1207-0362-08-P1
Instant Setback Cubby Cable
