Pace Technologies VM-500, Инструкция по эксплуатации

Страница: 14 / 18

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520 - 882 - 6598 Fax +1 520 - 882 - 6599 email: pace@metallographic.com Web: http://www.metallographic.com
10 Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
VM - 500 Auto Focus Digital
Stereo Microscope
6.0 Image Software Operation
The VM - 500 is provided with an HD monitor for use
with the microscope. Many of the features are
accessible through the user interface. The following
sections will provide information on these features.
6.1 Activating the User Interface
Move the mouse to the upper left corner of the
screen to have the user interface appear.
6.1.2 Locking the User Interface
The Focus Settings are located under the Control
Tab. Use these to adjust how the focus behaves.
Locked User Interface
Unlocked User Interface
6.2 Control Settings
6.2.1 Focus Settings
Move the mouse to the upper left corner of the
screen to have the user interface appear.
Click AF to enter autofocus mode. This mode allows
the VM - 500 to automatically focus on the image. The
Click F mode is a one - click autofocus. This mode
works similar to the AF mode. However, the
microscope will only focus once a click is registered.
The MF mode is for manual focusing. Use this to
manually control the focus of the machine. There is a
slider located above these buttons which is used to
fine - tune the focus for MF mode.