Pace Technologies TERAPRESS TP-7100S, Инструкция по эксплуатации

Страница: 37 / 62

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
TERAPRESS TP - 7100S
Mounting Press
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 - 520 - 882 - 6598 Fax +1 - 520 - 882 - 6599 email: pace@metallographic.com Web: https://www.metallographic.com
Figure 7 - 11 Glass - filled epoxies and diallyl phthalates
have a glass filler added to provide better edge
retention during grinding and polishing.
7.1.3 Epoxies / Diallyl Phthalates
Glass - filled epoxies and diallyl phthalates compression mounting resins provide a
harder mounting support edge next to the specimen (see Figure 7 - 11). These resins
are commonly used to support the edges of coatings, heat - treated samples, and other
specimens requiring better flatness. Figure 7 - 12 shows the polished interface between
a glass - filled epoxy and tungsten carbide specimen. Note that there is no noticeable
gap between the specimen and the mounting material showing that glass - filled epoxies
provide excellent support to the specimen edge even for extremely hard specimens.
Figure 7 - 12. Polished edge for tungsten carbide mounted in glass - filled epoxy.
32