Pace Technologies MEGA-T400S, Инструкция по эксплуатации

Страница: 16 / 30

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
MEGA - T400S
Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 - 520 - 882 - 6598 Fax +1 - 520 - 882 - 6599 email: pace@metallographic.com Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
3.4 Safety Tests
!
Examine and verify that the MEGA - T400S safety
devices and operating performance are in good working
condition before use. The following safety checks are
considered significant:
Emergency stop switch
Magnetic Safety switch
11
Test: Activate the main switch and the close
hood; depress emergency stop switch.
Proper
Response :
Machine powers down and motor
stops in 5 - 10 seconds
Malfunction: Machine does not lose power.
Corrective
measure:
If system does not power down,
disconnect power supply cord and call
service technician.
Magnetic safety lock out switch
Test: Activate the main switch and close the
hood; turn cut - off wheel ON then OFF;
Try to open the hood.
Proper
Response:
The hood does not open for approxi-
mately 3 - 5 seconds.
Malfunction: If hood opens immediately.
Corrective
measure:
If the cut - off wheel does not power
down, disconnect the power supply cord
and call a service technician.
Emergency stop switch
HOOD (Closing / Opening)
1. When closing the hood, press down on the hood to ensure
that the safety switch is engaged .
2. If the hood lock does not unlock DO NOT FORCE OPEN, or
try pushing down on the hood to release the safety pin.