2
2
Use the Pull Strap and the canister body to lift and steady the
unit. Wrap the Pull Strap around the center of the canister a
couple times and double it up in your hand. (If you have
someone to help you, you can jump to step 3 and install the
assembled canister and rails on the truck)
Place the Canister in truck bed just behind the cab
and center it from side to side. You will need to
place the canister on elevating objects, such as the
box the canister came in or 5 gallon buckets.
Note:
Ensuring that the canister is centered in the bed
will help assemble the rails to canister in the next
step.
STEP 2: POSITIONING CANISTER
STEP 3: COVERING STAKE POCKET
FIG. 2A
FIG. 2B
Elevating
Objects
Canister needs to be
high enough to have
rail install clearance
HARDWARE
USED:
STAKE POCKET
Included with your tonneau
cover is a stake pocket cover.
This helps to trim the outside
seal for your rails
(FIG. 3C).
First clean the stake pocket
hole area. If you have
Isopropyl Alcohol this will
work well. After the stake
pocket area is dry peel off the
adhesive backing and stick
the cover on the hole so that
it is entirely covered
(FIG 3A
& 3B).
FIG. 3A
FIG. 3B
FIG. 3C
