Online and the engine serial
number.
•
Fill the lubricating oil pan to the
smallest oil pan capacity listed
for the engine being serviced.
Then add 1 US qt (0.95 liters) of
oil at a time until it reaches the
high mark on the dipstick. Re-
cord the number of quarts/liters
added, so the capacity is known
the next time the oil is drained.
•
For the latest information for
your engine, please refer to
Cummins QuickServe
™
Online
(quickserve.cummins.com) or
call 1-800-CUMMINS
(1-800-286-6467)
Cooling System
Maintenance
The cooling system in your vehicle was
factory filled with extended life coolant that
meets or exceeds all ASTM D6210 and
Caterpillar EC-1 requirements. PACCAR
recommends only using a 50/50 mixture of
distilled water and ELC when cooling
system service is required. A 50/50 mixture
of ELC and distilled water will provide
freeze protection down to –34°F (–37°C),
which is adequate for most locations in
North America. For extremely cold
operating conditions, a 60/40 mixture
(coolant/water ratio) can be used to
provide freeze protection down to -62°F
(-54°C).
Unless otherwise optioned, factory fill
coolant is an ethylene glycol, nitrited
organic acid technology (NOAT) extended
life coolant (ELC) formulation at a 50:50
coolant-to-distilled water mixture. The
factory fill meets or exceeds ASTM D6210
and Cummins Engineering Standard 14603
for ISX and PX engines, and MAT74002 for
PACCAR MX-11 and MX-13 engine
requirements. Maintaining coolant
chemistry and freeze protection is critical to
engine and cooling system component
health and longevity.
WARNING
Coolant is toxic. DO NOT get the fluid
in eyes. If contact occurs, flood eyes
with large amounts of water for 15 mi-
nutes. Avoid prolonged or repeated
contact with skin. In case of contact,
immediately wash skin with soap and
water. DO NOT take internally. If swal-
lowed, seek immediate medical atten-
tion. DO NOT induce vomiting. Failure
to comply may result in death, person-
al injury, equipment or property dam-
age.
CAUTION
The engine cooling system has very
specific maintenance and inspection
requirements. Failure to follow require-
ments can damage the engine. Engine
damage can include but is not limited
to freezing, boiling, corrosion, pitted
cylinder liners. This information is
found in the engine manufacturers
owner’s manual. It is the owner’s re-
sponsibility to follow all requirements
listed in the engine manufacturers
owner’s manual.
ENGINE MAINTENANCE - Cooling System Maintenance
48
Y53-1185-1J1 (10/21)
2
Содержание PX-9
