Paccar Peterbilt 567 2021, Руководство пользователя

Страница: 265 / 332

ensure correct polarity, use a test
lamp or a voltmeter.
Remote Keyless Entry
The system will lock or unlock cab doors
with the key fob. The system will alert you
with parking lights when the selected doors
are locked or unlocked. There are two key
fobs provided with the system which
provide secure rolling code technology that
prevents someone from recording the entry
signal.
If you have issues with a key fob, replace
the battery and reprogram the key fob. In
some situations, the key fob may need to
be replaced and in others, a fuse may have
failed that could render both key fobs
inoperative. Contact your dealer for help if
a key fob does not work and it is not
because of a bad battery.
The key fob uses one CR2032, 3V battery.
Batteries should last approximately three
years, depending on use. Consistently
reduced range is an indicator that the
battery needs replacement. Batteries are
available at most discount, hardware, and
drug stores. The battery can be accessed
by removing the cover of the key fob. After
a new battery is installed, the key fob may
need to be reprogrammed to pair with the
vehicle.
Quantity Type
1 CR2032
How to replace key fob battery
If the key fob will not unlock the doors,
replace the battery.
1. Remove the cover of the key fob.
2. Replace the battery and dispose of
the old battery.
3. Check to see if the key fob is still
paired to the vehicle. If not,
reprogram the key fob.
Programming Key Fobs
The key fob may need to be paired with the
truck when the battery is replaced or when
the key fob has not been used for an
extended period of time.
1. Turn the ignition switch to the ON
position.
2. Open the driver and passenger
doors.
3. Press and hold the passenger
door’s unlock button for 5 seconds,
then release the button.
4. Within 3 seconds press and hold
the passenger door’s lock button
for 5 seconds, then release the
button. At this time you should hear
the vehicle cycle the locking
system by unlocking, then
relocking the doors. (This indicates
that the door module has entered
“learning mode.”)
5. Within the next 10 seconds, press
and hold the key fob’s lock button
for 5 seconds, (you should hear the
vehicle lock the doors) then press
and release the unlock button.
6. Once programming is complete (or
the 10 seconds from Step 5 has
passed), the vehicle will cycle the
locking system twice (unlock, lock,
unlock, lock). This process should
be repeated for each fob to be
paired with the module. A
maximum of five key fobs may be
paired to a single module.
MAINTENANCE - Electrical System
Y53-6126-1A1 (01/21) 263
5