Paccar Peterbilt 567 2021 Скачать руководство пользователя страница 153 | Manualshive

Страница: 153 / 332

background image

The following lists some conditions that
can limit the performance of the features
that use the camera:

•

Buildup of dirt, mud, water, snow,
ice, bugs, etc. on the windshield.
These should be able to be
resolved with proper use of the
windshield washer/wiper system as
the camera is intentionally installed
in the wiper path.

•

Windshield damage directly in front
of the camera. This should be fixed
as soon as possible.

•

Items on the windshield like
stickers, paint, window tint, etc.
These should not be placed in front
of the camera.

•

Items on the exterior of the truck
such as aftermarket visors, wind
deflectors, hood ornaments, car
racks, crane booms / hooks /
buckets, snowplows, mirrors, etc.

The Driver Assistance area of the Digital
Display indicates if the LDW system
recognizes lane markings as follows:

•

White lines indicate detected lanes.

•

Gray lines indicate where the road
is monitored for lane markings, but
none are detected.

•

Black lines mean that the LDW
feature is disabled.

•

A yellow line indicates an active
lane departure event.

A lane departure event occurs when the
vehicle tire crosses a lane marking without
the use of the turn signal. A lane departure
event is accompanied by an audible alert.

Lane Departure Active Warning Left

The LDW feature provides audible and
visual alerts only and does not attempt to
correct the vehicle’s position in the lane.
The operator can temporarily disable LDW
(disabling audible and visual alerts) by
using the dash mounted Lane Departure
Warning Disable switch (See

Departure Warning Disable

).

For more information on Lane Departure
Warning, see the ADAS OEM operator’s
manual specific for your vehicle.

Highway Departure Braking
(option)

WARNING

The driver must remain alert, react ap-
propriately, and use safe driving practi-
ces while using this Driver Assistance
feature. Ultimate responsibility for safe
operation of the vehicle remains with
the driver at all times. Failure to do so
may result in death, personal injury, or
property damage.

WARNING

The driver must remain visually aware
of the roadway and traffic and not rely
solely  on  Drivers  Assistance  features
to identify and respond to the variety of
vehicles  or  objects  sharing  the  road.
The driver must read the ADAS opera-
tor’s  manual  associated  with  this  fea-
ture and understand its limitations prior
to driving the vehicle. Failure to do so
may result in death, personal injury, or
property damage.

DRIVING - Driver Assistance

Y53-6126-1A1 (01/21)

151

4

«
...
151
152
153
154
155
...
»

Содержание Peterbilt 567 2021













































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Peterbilt 567 2021

ALLEY-GATOR RIGHT-HAND

Бренд: Labrie Страницы: 73

Бренд: Action Trackchair Страницы: 50

Бренд: Reely Страницы: 84

Бренд: Magliner Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды