manualshive.com logo in svg

Paccar Kenworth T680 2019, Руководство пользователя

Paccar Kenworth T680 2019 - высокотехнологичный грузовик с эффективным дизайном и мощным двигателем. Получите бесплатный руководство по эксплуатации на manualshive.com и узнайте все возможности этого великолепного транспортного средства. Управляйте грузовиком без проблем, загрузите инструкцию прямо сейчас.

Поделиться
Скачать
background image

 2-3

Section 2

Safety & Compliance

2/17

These statements are just part of the changes to the new certification regulation. Please refer to the Feb 15, 2005 final 
rule for all of the details related to this regulation. You can contact NTEA Technical Services Department at 1-800-441-
NTEA for a copy of the final rule (DocID 101760).

For Canadian final stage manufacturers see:

http://www.gazette.gc.ca/index-eng.html; and 
http://www.tc.gc.ca/eng/acts-regulations/menu.htm for the regulations. 

Or contact:

Transport Canada 
Tower C, Place de Ville, 330 Sparks Street 
Ottawa, Ontario K1A 0N5 
(613) 990-2309 
TTY: 1-888-675-6863

Noise and Emissions Requirements

This truck may be equipped with specific emissions control components/systems* in order to 
meet applicable Federal and California noise and exhaust emissions requirements. Tampering 
with these emissions control components/systems* is against the rules that are established by the 
U.S Code of Federal Regulations, Environment Canada Regulations and California Air Resources 
Board (CARB). These emissions control components/systems* may only be replaced with original 
equipment parts. 
 
Additionally, most vehicles in North America will be equipped with a Greenhouse Gas (GHG) 
“Vehicle Emission Control Information” door label indicating its certified configuration. The vehicle 
components listed on this label are considered emission control devices. 

Modifying (i.e. altering, substituting, relocating) any of the emissions control components/sys-
tems defined above will affect the noise and emissions performance/certification. Modifications 
that alter the overall shape and aerodynamic performance of a tractor will also affect the emis-
sion certification. If modifications are required, they must first be approved by the manufacturer. 
Unapproved modifications could negatively affect emissions performance/certification. There is no 
guarantee that proposed modifications will be approved.

Tires may be substituted provided the new tires possess a Coefficient of rolling resistance (Crr) 
equal to or lower than Crr of the original tires. Consult with your tire supplier(s) for appropriate 
replacement tires. 
 
Contact the engine manufacturer for any requirements and restrictions 

prior to any modifications. 

• 

For Cummins Contact 1-800-DIESELS or your local Cummins distributor.  Reference AEB 21.102.

It is possible to relocate the DEF tank, however the relocation requirements need to be followed. Any variance from the 
relocation requirements may cause the emissions control components/systems to operate improperly potentially resulting 
in engine de-rate. See page 4-3 for relocation requirements.

All 2017 engine emissions certified vehicles will be equipped with an On-Board Diagnostics 
(OBD) system. The OBD system is designed to detect malfunctions of any engine or vehicle com-
ponent that may increase exhaust emissions or interfere with the proper performance of the OBD 
system itself. 
 

NOTE

NOTE

Содержание Kenworth T680 2019



































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Kenworth T680 2019

Toolex 596365 Instruction Manual preview
596365
Бренд: Toolex Страницы: 8
JAC HFC1061 Owner'S Manual preview
HFC1061
Бренд: JAC Страницы: 56
Labrie Automizer Versa Hand Operator'S Manual preview
Automizer Versa Hand
Бренд: Labrie Страницы: 80
Labrie EXPERT 2000 2002 Operator'S Manual preview
EXPERT 2000 2002
Бренд: Labrie Страницы: 69
Warren FW-30 Operation And Maintenance Manual preview
FW-30
Бренд: Warren Страницы: 41
Magliner MAG220 Assembly Instructions preview
MAG220
Бренд: Magliner Страницы: 5
International Trucks ProStar+ Eagle Series. Operator'S Manual preview
ProStar+ Eagle Series.
Бренд: International Trucks Страницы: 263
Silverline 736265 Quick Start Manual preview
736265
Бренд: Silverline Страницы: 2
Scandinavia Auto 75600 Instruction Manual preview
75600
Бренд: Scandinavia Auto Страницы: 34
Roughneck 25329 Owner'S Manual preview
25329
Бренд: Roughneck Страницы: 7
OPTITEC Wireless Remote Control Wheel V3 Operator'S Manual preview
Wireless Remote Control Wheel V3
Бренд: OPTITEC Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды