13
MAN 9059117 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
DK-6600 Vejen, Denmark
E-mail: [email protected]
5.
Remove the centrifugal system by
unscrewing the middle screws (M8)
that secure the propeller.
6.
Remove the propeller from the pulley
by unscrewing the four assembly
screws.
7.
Fit the new propeller by repeating the
procedure in reverse order.
NB: When replacing the pulley, follow
the same procedure.
Replacing the shutter assembly
1.
Open the shutters by hand and remove the pin that connects the centre shutter with
the centrifugal system.
2.
Remove the side panels (1).
3.
Unscrew the two connecting pieces with
holes (8) and unscrew the M6 bolts (2) and
nuts (3) that hold the shutters’ lock springs.
4.
Pull out the shutters (7) and remove the
damaged shutter assembly (4, 5, 6).
5.
Insert the new shutter assembly.
6.
Put the shutters back and secure the
springs again.
7.
Put the side panels (1) back on.
Содержание 9059117
Страница 2: ......
