P.I.T. PWS20H-125B, Руководство по эксплуатации

Страница: 11 / 30

Cordless Angle Grinder
10
A list of authorized service centers can be
found on the official website of P.I.T. link:
https://pittools.ru/services/
Dispose of waste
Damaged power tools, batteries, ac-
cessories and waste packaging mate-
rials must be recycled and reused in
an environmentally friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
The date of manufacture of the product is
encoded in the serial number printed on the
body of the tool. The first 2 digits indicate the
year of issue, the next 2 digits indicate the
month.
TERMS OF WARRANTY SERVICE
To customers (users) of warranty service:
1. This warranty certificate is the only docu-
ment that confirms your right to free warranty
service. If this proof is not presented, no
claims will be accepted. Warranty certificates
cannot be recovered if lost or damaged.
2. It is required to provide a valid and legal
document for purchasing the product. The
document must have the name or seal of the
sales company; at the same time, state the
full model name of the purchased P.I.T. prod-
uct, the serial number on the nameplate of the
fuselage, and the date of purchase, and the
required warranty. The whole machine and its
accessories.
The warranty period:
1. The warranty period of the product is 12
months from the date of sale. During the
warranty period, the service department
will eliminate manufacturing defects free of
charge and replace the parts that fail due to
the manufacturer’s fault. In warranty repair, an
equivalent operable product is not provided.
Replaceable parts become the property of the
service provider.
2. The wear degree on the diameter of the
motor rotor commutator is less than 0.4 mm
(except for brushless motor tools), and the
internal damage caused by the quality of the
tool belongs to the warranty.
The following situations occur during the
warranty period, which is not covered by the
Flap disc
The flap disc enables you to machine curved
surfaces and profiles.
Flap discs have a considerably longer service
life, lower noise levels and lower sanding tem-
peratures than conventional grinding discs.
Cutting metal
►
Always use the protective guard when
cutting bonded abrasives.
When carrying out abrasive cutting, use a
moderate feed that is suited to the material
being machined. Do not exert pressure on the
cutting disc and do not tilt or swing the power
tool.
Do not attempt to reduce the speed of a cut-
ting disc coming to a stop by applying pres-
sure from the side.
The power tool must always work in an
up-grinding motion. Otherwise there is a risk
that it will be pushed
uncontrolled out of the
cut.
For best results when cutting profiles and
rectangular tubing, start at the smallest cross
section.
Maintenance and Service
Maintenance and Cleaning
►
Before any work on the machine itself
(e. g. maintenance, tool change, etc.) as
well as during transport and storage,
remove the battery from the power tool.
There is danger of injury when unintention-
ally actuating the On/Off switch.
►
For safe and proper working, always
keep the machine and ventilation slots
clean.
►
For extreme working conditions, always
use a dust extractor if possible. Frequently
blow out the ventilation slots and connect
the tool through a residual current circuit
breaker. When working on metals, conduc-
tive dust can be deposited inside the pow-
er tool. This may damage the protective
insulation of the power tool.
Regularly check that all screws are secure. If
a loose screw is found, tighten it immediately.
Otherwise, you expose yourself to the risk
of injury. Store and handle accessories with
care.
If the cord needs to be changed, contact an
authorized P.I.T.
Service
►
Have your power tool repaired only by
qualified personnel using original spare
parts. This ensures the safety of the power
tool.