P.I.T. PWG125-C, Руководство пользователя

Страница: 10 / 28

Concrete Grinder
09
6.Speed preselection adjustment wheel
7.Protective guard
8.Mounting Flange
9.cutting disc
($）
10.grinding disc($)
11.Clamping nut
12.Wrench
13.Dust shroud
14.Diamond Coated Grinding Disc($)
Technical Data
Model PWG125-C
Rated voltage 220V/50Hz
Power 1260W
Rated speed 3000-9000r/min
Max. disc diameter φ125mm
Internal diameter of disc 22.4mm
Spindle thread M14
Weight 3.25Kg
Protection class II
Assembly
Install protective equipment
►
Unplug the plug from the socket before
performing any operation on the power
tool.
Protective guard
Place the protective guard on the main jour-
nal. Adjust the position of the protective guard
to meet the operating requirements. Use a
screwdriver to tighten the locking screw to
lock the protective guard.
► Adjust the protective guard such that
sparking in the direction of the operator is
prevented.
Side handle
► Do not operate your power tool without
the side handle. Screw the side handle on
the left or right of the machine head depend-
ing on how you are working.
Fitting the abrasive tools
►Pull the plug out of the socket before
carrying out any work on the power tool.
►Do not touch grinding and cutting discs
until they have cooled down.
The discs can
become very hot while working.
Clean the grinding spindle and all the parts
to be fi tted. Lock the grinding spindle with the
spindle lock button before clamping and re-
leasing the abrasive tools.
► Do not press the spindle lock button
while the grinding spindle is moving. The
power tool may become damaged if you do
this.
Grinding/cutting disc
Pay attention to the dimensions of the abra-
sive tools. The diameter of the hole must
match that of the hub fl ange. Do not use an
adapter or reducer.
When using diamond cutting discs, make
sure that the arrow indicating the direction of
rotation on the diamond cutting disc matches
the direction of rotation of the power tool (see
the direction of rotation arrow on the machine
head).
See the graphics page for fi tting instructions.
To fasten the grinding/cutting disc, screw on
the clamping nut and tighten with the two-pin
spanner;
► After fi tting the abrasive tool, check that
the abrasive tool is fi tted correctly and can
turn freely before switching on the power
tool. Make sure that the abrasive tool does
not brush against the protective guard or oth-
er parts.
Dust shroud
Please refer to the illustration page for instal-
lation method.
Dust/Chip Extraction
The dust from materials such as lead paint,
some types of wood, minerals and metal
can be harmful to human health. Touching or
breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the
user or in people in the near vicinity.
Certain dusts, such as oak or beech dust,
are classified as carcinogenic, especially in
conjunction with wood treatment additives
(chromate, wood preservative). Materials con-
taining asbestos may only be machined by
specialists.
–Use a dust extraction system that is suitable
for the material wherever possible.
–Provide good ventilation at the workplace.
–It is advisable to wear a P2 filter class
breathing mask. The regulations on the mate-
rial being machined that apply in the country
of use must be observed.
► Avoid dust accumulation at the work-
place . Dust can easily ignite.