P.I.T. PMT20H-035A, Руководство пользователя

Страница: 8 / 24

Cordless multi-function tool
7
battery temperature range, the speed is
reduced or the power tool switches off. At
reduced speed, the power tool will run again
at full speed once the permitted battery tem-
perature is reached or the load is reduced. If
it automatically shuts down, switch the power
tool off , allow the battery to cool down, then
switch the power tool back on.
Recommendations for Optimal Handling of
the Battery
Protect the battery against moisture and wa-
ter.
Only store the battery within a temperature
range of −20 to 50 °C. Do not leave the bat-
tery in your car in the summer, for example.
Occasionally clean the ventilation slots on the
battery using a soft brush that is clean and
dry.
A significantly reduced operating time after
charging indicates that the battery has de-
teriorated and must be replaced. Follow the
instructions on correct disposal.
Maintenance and Service
Maintenance and Cleaning
► Before any work on the machine itself
(e. g. maintenance, tool change, etc.) as
well as during transport and storage,
remove the battery from the power tool.
There is danger of injury when unintention-
ally actuating the On/Off switch.
► For safe and proper working, always
keep the machine and ventilation slots
clean.
When the battery is no longer operative,
please refer to an authorized after-sales ser-
vice agent for P.I.T. power tools.
Dispose of waste
Damaged power tools, batteries, accessories
and waste packaging materials must be recy-
cled and reused in an environmentally friendly
manner.
Do not throw power tools and accumu-
lators / batteries into general household
waste!
Product serial number interpretation
serial number
The fi rst and second digits of the product seri-
al number from left to right
Year of production, the third and fourth digits
indicate the month of production, The fi fth and
sixth digits indicate the production day.
TERMS OF WARRANTY SERVICE
1. This Warranty Certifi cate is the only docu-
ment that confi rms your right to free warranty
service. Without presenting this certifi cate, no
claims are accepted. In case of loss or dam-
age, the warranty certifi cate is not restored.
2. The warranty period for the electric ma-
chine is 12 months from the date of sale,
during the warranty period the service depart-
ment eliminates manufacturing defects and
replaces parts that have failed due to the fault
of the manufacturer free of charge. In the war-
ranty repair, an equivalent operable product
is not provided. Replaceable parts become
property of service providers.
P.I.T is not liable for any damage that may be
caused by operation of the electric machine.
3. Only clean tool accompanied with the
following duly executed documents: this
Warranty Certificate, Warranty Card, with all
fi elds fi lled out, bearing the stamp of the trade
organization and the signature of the buyer,
shall be accepted for warranty repair.
4. Warranty repair is not performed in the fol-
lowing cases:
- in the absence of a Warranty Certifi cate and
a Warranty Card or their incorrect execution;
- with failure of both a rotor and a stator of the
electric engine, charring or melting of primary
winding of the welding machine transformer,
charging or starting-charging device, with in-
ternal parts melting, burn down of electronic
circuit boards;
- if a Warranty Certifi cate or a Warranty Card
does not correspond to this electric machine
or to the form established by the supplier;
- upon expiration of the warranty period;
- at attempts of opening or repair of the elec-
tric machine outside the warranty workshop;
making constructive changes and lubrication
of the tool during the warranty period, as ev-
idenced, for example, by the creases on the
spline parts of the fasteners of non-rotational
parts.
- when using electric tools for production or
other purposes connected with making a prof-
it, as well as in case of malfunctions related
to instability of the power network parameters
exceeding the norms established by GOST;
- in the events of improper operation (use the
electric machine for other than intended pur-
poses, attachments to the electric machine of
attachments, accessories, etc. not provided
by the manufacturer);