P.I.T. GCS52-C5, Руководство по эксплуатации

Страница: 15 / 32

Gasoline Chain Saw
14
Dispose of waste
Damaged power tools, batteries, acces-
sories and waste packaging materials must
be recycled and reused in an environmentally
friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
The fi rst and second digits of the product seri-
al number from left to right
Year of production, the third and fourth digits
indicate the month of production, the
The fi fth and sixth digits indicate the produc-
tion day.
TERMS OF WARRANTY SERVICE
1. This Warranty Certificate is the only doc-
ument confirming your eligibility for free
warranty service. Claims will not be accepted
without presenting this certifi cate. In case of
loss or damage, the warranty certificate will
not be restored.
2. The warranty period is 12 months from the
date of sale; during the warranty period, the
service department eliminates manufacturing
defects free of charge and replaces parts that
are out of order due to the manufacturer’s
fault. An equivalent serviceable tool is not pro-
vided during the warranty period. Replaced
parts become the property of the service de-
partment. The manufacturer is not responsible
for any damage that may be caused while
working with the tool.
3. For warranty repair, the instrument is ac-
cepted in its pure form, with the obligatory
presence of properly executed documents:
this warranty certificate, warranty card, with
completely fi lled fi elds, the stamp of the trade
organization and the buyer’s signature.
4. Warranty repairs are not performed in the
following cases:
- in the absence of a warranty certifi cate and
a warranty card or their incorrect execution;
- if the warranty certifi cate or coupon does not
belong to this instrument or does not corre-
spond to the sample set by the supplier;
-after the warranty period has expired;
- when attempting to open or repair the instru-
ment by yourself outside the warranty work-
shop;
- making constructive changes to the tool
during the warranty period, as evidenced, for
example, by creases on the spline parts of the
body parts fasteners.
-when using the tool for production or other
purposes related to making a profi t, as well as
-in the event of malfunctions associated with
the instability of the parameters of the electri-
cal network, exceeding the norms established
by GOST;
- in case of improper operation (use of the tool
for other purposes, installation of attachments
not intended by the manufacturer on the tool,
accessories, etc .;
- in case of mechanical damage to the case,
power cord and in case of damage caused
by the eff ects of aggressive agents and high
and low temperatures, the ingress of foreign
objects into the ventilation grilles of the tool,
as well as damage resulting from improper
storage (corrosion of metal parts);
- in case of natural wear of tool parts, as a
result of long-term operation (determined
by signs of full or partial depletion of the
resource, severe pollution, rust outside and
inside the tool, used lubricant in the gearbox);
-use of the tool for purposes other than those
specifi ed in the instruction manual.
-in case of mechanical damage to the tool;
-in the event of damage due to non-obser-
vance of the operating conditions specified
in the instructions (see the chapter “General
safety measures” in the instructions).
- damage to the product due to non-obser-
vance of the rules of storage and transporta-
tion.
Preventive maintenance of the tool (cleaning,
fl ushing, lubricating, replacing anthers, piston
and O-rings) during the warranty period is a
paid service.
The service life of the product is set by the
manufacturer and is 2 years from the date of
manufacture.
Possible violations of the above conditions
of warranty service are reported to the owner
after diagnostics at the service center.
The owner of the tool trusts the diagnostics at
the service center in his absence.
Do not use the power tool if there are signs
of increased heating, sparking, or noise in
the gear section. To fi nd out the reasons for
the malfunction, the buyer should contact the
warranty workshop.