12
Tent Poles and Shock Cord are similar to
the Tyres on your Car, they require both
maintenance and replacement from time
to time after unexpected damage. Over
stretching, dropping and age are the most
common causes of shock cord failure. Excessive
curvature during tent assembly or during
periods of high winds is the most common
causes of pole failure. By maintaining both the
Poles and Shock Cord you will be ensuring that
you get the best performance and life out of
your OZtrail Tent.
Replacing Shock-Cord
See Figure 11
Step One: Measure and Cut
Measure the length of the Tent Pole. You should
use a length of Shock Cord roughly two-thirds
the length of the Tent Pole. This will ensure that
the Shock Cord has the appropriate amount of
elasticity.
Step Two: Threading the Pole Sections
Tie a large knot in the end of the Shock Cord
length. This knot needs to be large enough
to stop it passing through the tubular hole in
the pole sections whilst you are threading it.
Thread the Shock Cord through the tubular hole
in each pole section.
Tent Pole and Shock Cord
Replacement
Figure 11
HELPFUL HINT
To maximise the life of your shock cord never
drop the tents poles during transporting.
When packing poles into their carry bag be
careful not to settle them by tapping them
vertically on a hard surface.
