-3-
AIO-OZONE Installation & Programming Guide
Photo N
Photo M
Tube
connection
Photo L
Brackets
Step 9:
Connect the power supply cord to the bottom
power supply jack
(DO NOT PLUG INTO WALL OUTLET).
Now slide the EOG unit onto the brackets
Photo L.
Photo O
Installation of EOG Unit continued
Step 10:
Attach the tubing to connection where inlet
screen and short gray tube was removed,
Photo L.
Step 11:
At this point if you are using the
Optional
Integrated power supply
with the
Nelsen model,
replace
the power supply cord by feeding it through the backplate
where original power supply ran,
Photo N.
Step 12:
Route the gray EOG wire through the hole along
with the power supply as shown in
Photo O.
