OPERATION
Power Take Off Mode (Max. Supplied Power: 1200W)
The power take off mode allows you to start the vacuum cleaner
automatically by turning the connected power tool on. When
you switch off the power tool, the wet and dry vacuum cleaner
switches off as well after a preset delay.
1. Connect the power
cable on your electric
tool to the Power Take
Off Socket and connect
the suction hose to the
extractor connector on
your power tool. Check
that the connections are
secure and airtight.
2. Set the switch on the wet
and dry vacuum cleaner to
the power take off mode.
3. Follow normal operating procedures for the connected power
tool.
Switching The Vacuum On or Off
1. Press the right side of the
switch to turn the unit on.
2. Press the switch to the centre position to turn the unit off.
WARNING!
WHEN WET VACUUMING, THE SAFETY
FLOAT STOPS THE VACUUM SUCTION AUTOMATICALLY
WHEN THE MAXIMUM CAPACITY IS REACHED. SWITCH
OFF THE VACUUM AND EMPTY THE TANK BEFORE
CONTINUING TO VACUUM.
WARNING!
IF THE VACUUM TIPS OVER DURING USE,
THE SAFETY FLOAT WILL ALSO ENGAGE TO PREVENT
SPILLAGE. SWITCH THE VACUUM OFF, REST IT
VERTICALLY ON THE WHEELS & WAIT FOR THE FLOAT
TO RESET BEFORE CONTINUING TO VACUUM.
Note:
Moving the vacuum back and forth across certain flooring
types can cause a buildup of static on the tank, which may give
you a shock when you touch it. An anti static chain has been
attached to the tank to prevent this from happening.
5. CONTROLS
POWER
TAKE OFF
+
VACUUM/
BLOWER
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
A RESIDUAL CURRENT DEVICE (RATED 30mA OR
LESS) SHOULD BE USED.
VWD-1235PTO
POWER
TAKE OFF
+
VACUUM/
BLOWER