Attaching The Castors
1. Turn the tank upside down
and place on a level surface.
2. Press a castor wheel firmly
into the slot until it clicks
into place.
3. Press the wheels firmly into
either side of the frame.
Attaching The Motor Unit
1. Align the sides of the motor
unit with the motor securing
clips on the tank.
2. Hook the securing clips over the lip of
the motor unit and then press lower
end of the clips against the sides of
the tank to lock them in place.
Attaching The Handle
1. Align the handle with slot on
the top of the motor unit.
2. Insert the 2 supplied screws
into the holes and fasten in
place with a screwdriver (not
supplied).
1. Accessory Storage Slot
2. Carry Handle
3. Motor
4. Blower Port
5. Filter Cage
6. Motor Securing Clip
7. Extension Tube
8. Wheels
9. Crevice Tool
10. Castor Wheel
11. Drain Outlet
12. Tank
13. Vacuum Inlet
14. Power Take Off Socket
15. On/Off/Power Take Off
Switch
WET & DRY VACUUM
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
3
4
12
9
8
7
5
6
14
15
11
13
10
WARNING!
ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
