3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
Fitting the Motor
1. When fitting the motor to the tank,
position it so that the motor securing
clips on the tank align with the
fastening points on the motor.
2. Fasten the motor securing clips to
the motor, making sure that they
lock into place correctly.
3. To remove the motor, open the
motor securing clip and lift the motor out
of the tank.
Fitting the Handle
1. Align the holes on either side of the
handle with the holes in the top side
of the motor.
2. Insert two screws (supplied) into the
handle and tighten with a screwdriver
(not supplied).
Assembling the Castors
1. Turn the container
upside down.
2. Insert the castor
assemblies into
the base of the tank. Use
firm hand pressure.
WARNING!
ENSURE THE TOOL IS DISCONNECTED FROM
THE POWER SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
1. On/Off/Power Take Off Switch
2. Carry Handle
3. Accessory Mount
4. Motor
5. Filter Cage
6. Safety Float
7. Blow Outlet
8. Power Take-Off Socket
9. Vacuum Inlet
10. Tank
11. Motor Securing Clips
12. Castors
13. Cable Hook
WET & DRY VACUUM
ACCESSORIES
14. Hose
15. Premium Extension Tubes
16. Filter Bag
17. Adaptor
18. Floor Tool
19. Crevice Tool
20. Power Tool Adaptor
21. Dust Bag
22. Foam Filter
4
8
14
21
17 18 19
15
22
16
1
2
3
5
9
7
11 12 13
6
10
20