3. FITTING HOSES & NOZZLES
4. OPERATION
Connect the suction hose to
the corresponding connector
on the wet and dry vacuum,
depending on the application
required:
Vacuuming
Connect the suction hose to
the vacuum inlet.
Blowing
Connect the suction hose to
the blow outlet.
Extension Tube and
Adaptor
1. The suction hose can be extended by attaching one or more
sections of the 3 part extension tubes.
2. The adapter must be inserted
between the extension tube and
whichever of the nozzles is required.
Suction Tools
Floor Tool
The floor tool is for vacuuming solids and
liquids over medium to large areas.
Crevice Tool
The crevice tool is designed for cleaning
crevices and edges.
OPERATION
IMPORTANT!
SWITCH OFF THE EQUIPMENT IF LIQUID
OR FOAM IS EMITTED WITH THE EXHAUST AIR WHEN
WET VACUUM CLEANING.
IMPORTANT!
WHEN WET VACUUMING, THE SAFETY
FLOAT TURNS OFF THE WET AND DRY VACUUM
CLEANER AUTOMATICALLY WHEN THE MAXIMUM
LEVEL IS REACHED.
IMPORTANT!
THE WET AND DRY VACUUM CLEANER
IS NOT SUITABLE FOR THE VACUUMING OF
COMBUSTIBLE LIQUIDS.
VWD-1225PT
On/Off/Auto Switch
Switch position 0: OFF
Switch position I: Normal operation
Switch position AUTO: Power Take
Off Mode
Power Take Off Mode (1150W max.)
1. Connect the power cable on your electric tool to the Power
Take Off Socket and connect the suction hose to the extractor
connector on your power tool. Check that the connections are
secure and airtight.
NOTE:
You can use the supplied Adaptor or Power Tool Adaptor
to connect the suction hose to the power tool. To do so, fit it
between the suction hose and the extractor port on the power tool.
2. Set the switch on the wet and dry
vacuum cleaner to the Auto: Power
Take Off mode. The moment you
switch on the power tool, the wet
and dry vacuum cleaner switches
on as well. When you switch off
the power tool, the wet and dry
vacuum cleaner switches off as
well after a preset delay.
AUTO
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
A RESIDUAL CURRENT DEVICE (RATED 30mA OR LESS)
SHOULD BE USED.
AUTO
