![background image](http://html1.mh-extra.com/html/ozito/vwd-1220/vwd-1220_instruction-manual_1666879004.webp)
3. FITTING HOSES & NOZZLES
4. OPERATION
Connect the suction hose to the
corresponding connector on the
wet and dry vacuum, depending on
the application required:
Vacuuming
Connect the suction hose to
the vacuum inlet
Blowing
Connect the suction hose to
the blow outlet.
Extension Tube and Adaptor
1. The suction hose can be extended by attaching one or more sections
of the 3 part extension tubes.
2. The adapter must be inserted between
the extension tube and whichever of the
nozzles is required.
Suction Tools
Floor Tool
The floor tool is for vacuuming solids and liquids
over medium to large areas.
Crevice Tool
The crevice tool is designed for cleaning crevices
and edges.
OPERATION
IMPORTANT!
SWITCH OFF THE EQUIPMENT IF LIQUID
OR FOAM IS EMITTED WITH THE EXHAUST AIR WHEN
WET VACUUM CLEANING.
IMPORTANT!
WHEN WET VACUUMING, THE SAFETY
FLOAT TURNS OFF THE WET AND DRY VACUUM
CLEANER AUTOMATICALLY WHEN THE MAXIMUM
LEVEL IS REACHED.
IMPORTANT!
THE WET AND DRY VACUUM CLEANER
IS NOT SUITABLE FOR THE VACUUMING OF
COMBUSTIBLE LIQUIDS.
VWD-1220
On/Off Switch
Switch position 0: OFF
Switch position I: ON
Dry Vacuuming
Use the dust bag and the filter bag for dry
vacuuming (see
2. Fitting the Filter
).
Check that the filter is securely fitted at all
times.
Wet Vacuuming
For wet-vacuuming, use the foam filter
(see
2. Fitting the Filter
).
Check that the filter is securely fitted
at all times.
NOTE:
The tank will collect 12 Litre max of
fluid and the float switch will turn off the vac.
Blowing
Connect the suction hose to the blow outlet
on the wet and dry vacuum cleaner.
This vacuum must be used with a residual current device
with a rated residual current of 30mA or less.