manualshive.com logo in svg

Ozito SDA-2100, Инструкция по эксплуатации, Страница: 4 / 6

Поделиться
Скачать
Ozito SDA-2100 Скачать руководство пользователя страница 4

SDA-2100

4.  CONTROLS

5.  SCREWDRIVING

OPERATION

1   To operate the screwdriver, 

press the on/off trigger.

2   To stop operation, release the 

on/off trigger.

The battery charge indicator will 

illuminate when the on/off trigger 

is pressed, indicating the level of 

charge of the integrated battery.

1   For forward rotation, push the 

forward/reverse button towards 

the left side of the tool.

2   For reverse rotation, push the 

forward/reverse button towards 

the right side of the tool.

The work light will torn on when 

the on/off trigger is pressed, 

illuminating dark areas.

Note:

 The work light can be 

turned on without the screwdriver 

operation by pushing the forward/

reverse button into the middle 

position.

Low State of Charge

(Battery Requires Charging) 

Mid State of Charge

Full State of Charge

Forward / Reverse Button

Work Light

On/Off Trigger

Battery Charge Indicator

FWD

REV

2   Select the desired forward or 

reverse driving direction.

4   Squeeze the on/off trigger to 

start driving.

1   Select the required driver bit 

and load into the bit holder.

Note:

  The cartridge will not rotate 

unless the loading switch is 

pushed back completely

3   Hold the screwdriver firmly and 

place the bit on the screw to be 

fastened.

5   Fasten the screw into the work 

piece.

Note: 

Do not force the screwdriver 

or apply side pressure to elongate 

the hole. Let the tool do the work.

FWD

REV

Содержание SDA-2100







Отзывы:

Нет отзывов