2. LOADING A DRIVER BIT
3. CHANGING CARTRIDGE BITS
2 Slide the loading switch
forward so that the bit is
pushed into the bit holder.
2 Slide the loading switch
forward so that the bit is
pushed into the bit holder.
4 Slide the loading switch back
to retract the driver bit into
the cartridge.
2 Slide the loading switch
backward so that the bit
retracts from the bit holder.
1 Rotate the cartridge until the
required driver bit can be seen
through the view window.
Note:
The cartridge will not rotate
unless the loading switch is
pushed back completely
1 Select the driver bit you wish to
remove or replace by rotating
the cartridge.
Note:
The cartridge will not rotate
unless the loading switch is
pushed back completely
3 Pull the driver bit out of the bit
holder and replace with a new
bit.
The pre-loaded driver bits can be removed from the cartridge and
replaced with a different driver bit if desired.
1 Press down the loading switch
to allow the switch to slide.
Selecting and Loading Driver Bits
Selecting and Loading Driver Bits
Unloading Driver Bits