ONLINE MANUAL
Scan this QR Code with your mobile device
to take you to the online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1. Slide the nozzle over the
blower outlet, aligning the
nozzle grove (A) with the
tab (B) on the outlet of the
jet blower.
2. When the nozzle has
reached one of the three end
points on the outlet of the
jet blower, rotate the nozzle
to lock in place.
Fitting the Jet Blower Nozzle
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND BATTERIES DISCONNECTED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
BRUSHLESS JET BLOWER
1 2 3
4
1. Nozzle
2. Variable Speed Dial
3. Turbo Boost Button
4. ON/OFF Trigger
5. Handle
6. Battery Seating
7. Scraper Ring
B
A
WARNING!
DO NOT USE ANY ATTACHMENTS
OR ACCESSORIES NOT RECOMMENDED BY THE
MANUFACTURER OF THIS PRODUCT, AS IT CAN
RESULT IN SERIOUS PERSONAL INJURY.
ACCESSORIES
8. Shoulder Strap
Fitting the Shoulder Strap
1. Ensure the shoulder strap is
clipped onto the eyelet at the
top of the jet blower.
2. To unclip the jet blower, press
either side of the buckle.
Note:
To use the shoulder strap simply slide the strap over your shoulder so that some
of the weight of the jet blower can be taken by your shoulder.
5
6
8
B
A
There are three settings for adjusting the length of the nozzle to your
requirements.
WARNING!
THE NOZZLE MUST BE TURNED AS FAR
AS IT WILL GO TO ENSURE IT IS FIRMLY SECURE IN
POSITION.
7