WARNING!:
BEFORE CLEANING YOUR BLOWER
VAC OR CARRYING OUT ANY MAINTENANCE
PROCEDURE, MAKE SURE THE BATTERIES ARE
REMOVED TO PREVENT ACCIDENTAL STARTING.
Cleaning and storing
• There are no user serviceable parts in the blower vac; if a fault is suspected, return
the blower vac to a power tool repairer.
• Keep air intake clean and air vents free from debris to avoid overheating the motor.
• Do not use cleaning agents to clean the plastic parts of the blower vac. A mild
detergent on a damp cloth is recommended. Water must never come into contact
with the blower vac.
• After shaking out the catch bag, turn it inside out and thoroughly clean it in order to
prevent mold and unpleasant odours from forming.
• Rub a bar of dry soap across the zipper teeth if the zipper becomes difficult to pull.
• If the blower vac vibrates abnormally, stop motor immediately. Abnormal vibration
usually indicates a mechanical problem continued operation could lead to injury or
damage.
• No lubrication is necessary as the motor is equipped with lifetime-lubrication
bearings.
• Keep the ventilation vents of the blower vac clean at all times, if possible, prevent
foreign matter from entering the vents.
• After each use, blow air through the blower vac housing to ensure it is free from
all dust particles which may have built-up. Build up of dust particles may cause the
blower vac to overheat and fail.
• If the enclosure of the blower vac requires cleaning do not use solvents but a moist
soft cloth only. Never let any liquid get inside the blower vac; never immerse any part
of the blower vac into liquid.
• When not in use, the blower vac should be stored in a dry, frost free location not
within the reach of children.
Note:
Ozito Industries will not be responsible for any damage or injuries caused by
the repair of the blower vac by an unauthorised person or by mishandling of the blower
vac. This tool is designed for DIY use - use in commercial or industrial environments
will void the warranty.
OPERATION (cont.)
WARNING!
MAKE SURE THAT THE TOOL IS
SWITCHED OFF AND BOTH BATTERIES ARE
REMOVED. WAIT UNTIL THE IMPELLER HAS
STOPPED BEFORE ATTEMPTING TO EMPTY
OR REMOVE THE COLLECTION BAG.
Emptying The Collection Bag
6. USING THE BLOWER VACUUM (cont.)
For best results when vacuuming it is recommended to empty the collection
bag after it becomes half full. As the bag fills beyond half way, vacuuming
performance will decrease. Always empty the collection bag after you have
finished your job. Organic waste should be composted.
1. Open the zipper on the bag and
empty in desired location.
2. Be sure to close the zipper prior to
operating the tool.
Clearing Debris
To access the impeller, remove the vacuum tube and collection bag.
Wear protective gloves.
PUSH
UNDO
“CLICK”
“CLICK”
PULL
CLEAN
CLEAN
CLEAN
CLEAN
1. Unfasten hooks from the bag
holding points and remove
the collection bag from the
blower vac outlet
2. Unscrew thumb screw on the
body of the motor housing and
remove tube assembly from
motor housing.
3. Do not reach in, use a suitable
tool (like a long stick) to remove
any debris from the impeller and
within the blower vac outlet.
MAINTENANCE