KNOW YOUR PRODUCT
1. TUBE ASSEMBLY
1. Guide Wheels
2. Lower Suction Tube
3. Upper Suction Tube
4. Secondary Handle
5. Shoulder Strap Mount (Vac)
6. Battery Seating x 2
7. On/Off Switch
8. Collection Bag
9. Blower Tube
10. Shoulder Strap Mount (Blower)
11. Variable Speed Dial
12. Soft Grip Handle
13. Air Intake Cover
14. TURBO Boost Button
BLOWER VACUUM–MULCHER
1
2
3
4
5
6
7
8
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
ACCESSORIES
15. Shoulder Strap
10 11
9
WARNING!:
ENSURE THE TOOL IS OFF AND THE
BATTERIES REMOVED BEFORE PERFORMING ANY OF
THE FOLLOWING OPERATIONS.
ASSEMBLY
Assembling the Vacuum Tube
2. Connect lower suction tube with the matching upper suction tube being
sure that the bag holding points are on the same side. Push together until
they are connected firmly and the guide lugs (one each side) click into the
corresponding recess.
1. Fit the guide wheels onto the
lower suction tube. Press and hold
the release button as you slide the
guide wheels onto the mount and
let it snap into place.
Note:
The position can be changed at
any time by pressing the release button
again and sliding to any of 5 positions.
Make sure that it snaps into place correctly.
Press
Bag Holding Point
Guide Lug
WARNING!:
USE THE SUCTION TUBES ONLY IF IT IS
FULLY ASSEMBLED.
3. Fit the additional handle over the
mount on the upper suction tube.
Press
Bag Holding Point
Guide Lug
Press
Bag Holding Point
Guide Lug
Press
Bag Holding Point
Guide Lug
Press
Bag Holding Point
Guide Lug
4. Insert the bolt from the side with
the hexagon recess.
5. Rotate the handle to the desired
position, fit and tighten the knob
to secure in place.
12
13
14
15
BLOWER CONFIGURATION
VACUUM–MULCHER CONFIGURATION
