1. FITTING THE BATTERY & HANDLE
Inserting & Removing the Battery
1 Slide the battery into the seating
at the rear of the tool until it
clicks into place.
2 To remove, press and
hold the battery release
tab and then slide out.
a
b
Attaching the Side Handle
3 Secure in position
by rotating the
lower section of the
handle clockwise.
2 Rotate into the desired
handle position and then push
backwards so that the notch
below the chuck inserts into
one of the grooves in the upper
handle.
Note:
Ensure the handle is
pushed all the way back to avoid
interference with the chuck.
KNOW YOUR PRODUCT
SETUP & PREPARATION
BRUSHLESS ROTARY HAMMER DRILL
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to the
online manual.
BATTERY & CHARGER
This tool is compatible with all battery and chargers from the Ozito
Power X Change Range.
For optimal performance, we recommend the use of a 3.0Ah battery or
higher to operate this Power X Change Rotary Hammer.
1 SDS+ Chuck
2 Depth Rod Release Button
3 Metal Depth Rod
4 Mode Selector Dial
5 Anti-vibration Rear Handle
6 On/Off Trigger
7 Forward / Reverse Lever
8 Side Handle
9 LED Worklight
10 Battery Seating
11 Sure Grip Handle
1
2
3
4
5 6 7
11
10
9
8
1 Loosen the side
handle by rotating
the lower section
anti-clockwise and
then slide over the
chuck and onto the
neck of the drill.
