9. MAINTENANCE
8. STOPPING ENGINE & THROTTLE
OPERATION (cont.)
1. To increase the speed of
the engine and water flow,
move the throttle lever down
towards the indicator.
2. To decrease the speed of
the engine and water flow,
move the throttle lever up
towards the indicator.
The throttle is used to regulate the rotational speed of the
engine, which also controls the water flow out of the discharge
outlet.
Before storing the pump, it is
recommended to empty the
pump body of any water.
1. Remove the air filter cover
screw.
2. Remove the cover and the air
filter. Check that the filter is
intact and clean, if not rinse
with water and allow to dry.
3. Soak the filter in clean
machine oil and
gently squeeze out
any excess.
Note:
Do not wring or
twist the filter.
4. Insert the filter and
secure with the filter
cover and screw.
1. Remove the spark plug
lead.
3. Clean the electrode with a
metal brush and remove
any carbon build-up or
replace the spark plug.
Turn the drain screw
anti-clockwise and remove from
the pump body to allow excess
water to drain out.
Ensure that the drain screw is
fitted once all water has drained
out.
2. Remove the spark plug
using the spark plug
wrench supplied by turning
anti-clockwise.
4. Refit the spark plug using
the spark plug wrench.
Place the spark plug lead
back on.
Storing the Pump
Replacing the Air Filter
Replacing the Spark Plug
Stopping the Engine
1. Decrease the speed of
the engine by moving the
throttle lever up
(slow position).
TRANSFER PUMP
1.7HP
4 Stroke OHV
TRANSFER PUMP
1.7HP
4 Stroke OHV
ON
CHOKE
2. Turn the on/off switch to
the OFF (0) position and
the engine will stop.
TRANSFER PUMP
1.7HP
4 Stroke OHV
TRANSFER PUMP
1.7HP
4 Stroke OHV
ON
CHOKE
3. Move the fuel lever to the
left (closed position).
TRANSFER PUMP
1.7HP
4 Stroke OHV
TRANSFER PUMP
1.7HP
4 Stroke OHV
ON
CHOKE
Adjusting Throttle
Note:
Allow the engine to cool
down before moving or
storing the pump.
