ADDITIONAL SAFETY INSTRUCTIONS FOR ROUTERS
7
This appliance is not intended for
use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Recommendations for the use of a residual current device
with a rated residual
current of 30mA or less.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool. Before
use, inspect the extension lead for signs of damage, wear and ageing. Replace the
extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an
extension lead not suitable for the power input of the tool or which is damaged or
defective may result in a risk of fire and electric shock.
It is recommended that the extension lead is a maximum of 25m in length. Do Not use
multiple extension leads.
•
Wear safety glasses or goggles when operating this tool.
•
Only use router bits with a shank diameter equal to the size of the collet installed in
the tool.
•
Only use router bits suitable for the no-load speed of the tool.
•
Do not use the tool in an inverted position.
•
Do not attempt to use the tool in a stationary mode.
•
Take special care when routing MDF or surfaces coated with lead-based paint:
•
Wear a dust mask specifically designed for protection against lead paint dust and
fumes and ensure that persons within or entering the work area are also protected.
•
Do not let children or pregnant women enter the work area.
•
Do not eat, drink or smoke in the work area.
•
Dispose of dust particles and any other debris safely.
Содержание PRR-1200
Страница 1: ......
