WARNING!
Read all safety warnings and all instructions.
Failure to follow
the warnings and instructions may result in electric shock, fire and/or serious
injury.
Save these instructions
RISK OF EXPLOSION OR FIRE
What can happen:
• Spilled petrol and its vapours can become ignited from cigarette sparks, electrical arcing,
exhaust gases and hot engine components such as the muffler.
• Heat will expand fuel in the tank which could result in a fire.
• Operating the tool in an explosive environment could result in a fire.
• Muffler exhaust heat can damage painted surfaces, melt any materials sensitive to heat
(such as siding plastic, rubber or vinyl) and damage live plants. Keep hot tool away from
other objects.
• Improperly stored fuel could lead to accidental ignition. Fuel improperly secured could get
into the hands of children or other unqualified persons.
How to prevent it:
• Shut off engine and allow it to cool before adding fuel to the tank.
• Use care when filling the tank to avoid spilling fuel. Move tool away from fuelling area
before starting engine.
• Keep maximum fuel level 20mm below top of tank to allow for expansion.
• Operate and refuel in well ventilated areas free from obstructions.
• Store fuel in a approved container (AS/NZS 2906-1999) for petrol. Store in a secure
location away from the work area. Make sure the container is clearly marked “fuel”.
RISK TO BREATHING
What can happen:
• Breathing exhaust fumes can cause serious injury or death.
How to prevent it:
• Operate tool in a well ventilated area. Avoid enclosed areas.
• Never operate unit in a location occupied by other people or animals.
SAVE THESE INSTRUCTIONS
1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate petrol tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a petrol tool.
Distractions can cause you to lose control.
2) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a
petrol tool.
Do not use a power tool while you are tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while operating power tools may result in
serious personal injury.
b) Use safety equipment. Always wear eye protection.
Safety equipment such as a
dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Remove any adjusting key or wrench before turning the tool on.
A wrench or a key
that is left attached to a rotating part of the petrol tool may result in personal injury.
d) Do not overreach. Keep proper footing and balance at all times.
This enables better
control of the petrol tool in unexpected situations.
e) Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in
moving parts.
f) If devices are provided for the connection of dust extraction and collection
facilities ensure that these are connected and properly used.
Use of these devices
can reduce dust-related hazards.
3) Petrol tool use and care
a) Do not force the petrol tool. Use the correct petrol tool for your application.
The
correct petrol tool will do the job better and safer at the rate for which it was designed.
b) Do not use the petrol tool if the switch does not turn it on and off.
Any petrol tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Turn tool off completely before making any adjustments, changing accessories,
or storing petrol tools.
Such preventive safety measures reduce the risk of starting the
petrol tool accidentally. Hair can be caught in moving parts.
d) Store idle petrol tools out of the reach of children and do not allow persons
unfamiliar with the petrol tool or these instructions to operate the petrol tool.
Petrol
tools are dangerous in the hands of untrained users.
e) Maintain petrol tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the petrol tool’s operation.
If
damaged, have the petrol tool repaired before use. Many accidents are caused by poorly
maintained petrol tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the petrol tool, accessories and tool bits etc., In accordance with these
instructions and in the manner intended for the particular type of petrol tool, taking
into account the working conditions and the work to be performed.
Use of the petrol
tool for operations different from intended could result in a hazardous situation.
h) This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
i) Children should be supervised to ensure that they do not play with the appliance.
4) Service
a) Have your petrol tool serviced by a qualified repair personnel using only identical
replacement parts.
This will ensure that the safety of the petrol tool is maintained.
ADDITIONAL SAFETY INSTRUCTIONS FOR HEDGE TRIMMERS
SAFETY INSTRUCTIONS
• Keep all parts of the body away from the cutter blade.
Do not remove cut material
or hold material to be cut when blades are moving. Make sure the switch is off when
clearing jammed material. A moment of inattention while operating the hedge trimmer
may result in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade stopped.
When
transporting or storing the hedge trimmer always fit the cutting device cover. Proper
handling of the hedge trimmer will reduce possible personal injury from the cutter
blades.
• Hold the power tool by insulated gripping surfaces only, because the cutter blade
may contact hidden wiring
. Cutter blades contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
• Perform visual inspection on the hedge being trimmed.
To ensure no wire fences or
foreign objects that the hedge trimmer may contact during operation.
•
Never allow children or people unfamiliar with these instructions to use the Hedge
Trimmer.
•
Avoid using the Hedge Trimmer, while people, especially children or pets, are nearby.
•
Use the Hedge Trimmer only in daylight or good artificial light.
•
Never operate the Hedge Trimmer with damaged guards or without guards in place.
•
Start the Hedge Trimmer only when the hands and feet are away from the cutting
blades.
•
Use only the manufacturer’s recommended replacement parts and accessories.
•
Always remove the spark plug from the Hedge Trimmer before carrying out
maintenance or cleaning work.
•
Inspect and maintain the Hedge Trimmer regularly. Have the Hedge Trimmer repaired
only by an authorized repairer.
•
When not in use, store the Hedge Trimmer out of the reach of children.
•
Face the cutting blades away from yourself, other people and animals while the Hedge
Trimmer is in operation.
•
Disconnect the spark plug from the Hedge Trimmer before making any adjustments.
• Ensure you use oil-mix fuel. Ensure that you mix 40 parts unleaded fuel to 1 part
2-stroke oil. If not, the engine will overheat and cause damage to your hedge trimmer.
•
Use both handles.
•
Keep ventilation openings clear of debris. Keep handles dry, clean and free of oil and
grease.
•
Never reach underneath the Hedge Trimmer (the cutting blade area) until it has
completely stopped and the engine stopped.
WARNING!
When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
WARNING!
This appliance is not intended for use by young or infirm persons
unless supervised by a responsible person to ensure that they can use the
appliance safely. Young children should be supervised to ensure that they do not
play with the appliance.
