Ozito PHT-550 Скачать руководство пользователя страница 6

Cleaning the air filter

Dirty air filters reduce the engine output by restricting air to the 

carburettor. Regular checks are therefore essential. The air filter should 

be checked after every 25 hours of use and cleaned if necessary. If the 

air contains a lot of dust, the air filter should be checked more frequently.

1.   Push in the tab at the front of  

the air filter cover and remove.

3.   Clean the filter element by tapping it or blowing it.

4.  Reassemble in reverse order.

Maintenance of the spark plug

Spark Plug: Champion RCJ7Y or equivalent

1.   Pull off the spark plug lead.

3.   Check the spark plug for dirt and  

grime and if necessary clean it with a 

copper wire brush.

  Spark plug sparking gap = 0.6mm. 

4.   Reassemble in reverse order.

Note:

 The spark plug should be checked every 50 hours of operation.

Maintenance of the gearbox

The gearbox must be lubricated every 

year at the lubrication nipple. Place a 

conventional grease gun on the nipple and 

press approx. 3 strokes of conventional 

machine grease into the gearbox. If you 

use the trimmer frequently, grease the 
gearbox more often. 

MAINTENANCE

7.  FILTER & SPARK PLUG MAINTENANCE

6.  BLADE MAINTENANCE

Sharpening the cutting blade

The cutter blades are high quality, made of tempered steel and in 

normal use there is no need to sharpen the blades. 
If you accidentally strike a wire, 

stone, glass or other hard object, 

this may cause a notch in the 

blade. There is no need to remove 

the notch as long as it does not 

adversely affect the movement of 

the cutting edges. 
If it does adversely affect this 

movement, switch off the machine 

and use a fine file or a fine grinding 

stone to remove the notch. 

Lubricating the blade

For best operation and longer blade life, lubricate the hedge trimmer 

blade with light weight machine oil before and after each use.

1.   Lay the hedge trimmer on a flat 

surface. Apply a light weight 

machine oil along the edge of 

the top blade. 

2.   Run blades for a few seconds to 

distribute the oil.

 0.6mm

2.  Remove the filter element.

 0.6mm

 0.6mm

2.   Loosen (anti-clockwise) the 

spark plug using the socket 

wrench provided.

 IMPORTANT:

 NEVER CLEAN THE AIR FILTER WITH PETROL 

OR INFLAMMABLE SOLVENTS.

 IMPORTANT:

 DO NOT OIL THE HEDGE TRIMMER WHILST 

RUNNING.

Содержание PHT-550










Отзывы: