Warning!
The use of any accessory or attachment, or performance of any
operation with this tool other than those recommended in this instruction
manual may present a risk of personal injury.
8. Check for damaged parts.
Before use carefully check the tool and power lead
for damage. Check for misalignment and seizure of moving parts, breakage of
parts, damage to guards and switches and any other conditions that may affect
its operation. Ensure that the tool will operate properly and perform its
intended function. Do not use the tool if any parts are damaged or defective.
Do not use the tool if the switch does not turn it on and off. Have any
damaged or defective parts repaired or replaced by a power tool repairer.
Never attempt any repairs yourself.
9. Unplug the tool.
Unplug the tool when it is not in use, before changing any
parts of the tool, accessories or attachments and before servicing.
10. Avoid unintentional starting.
Do not carry the tool with a finger on the on/off
switch. Make sure the tool is switched off when plugged in.
11. Do not abuse the cord.
Never carry the tool by its cord or pull it to disconnect
from the socket. Keep the cord away from heat, oil and sharp edges.
12. Store idle tools.
When not in use, tools should be stored in a dry, locked up or
high place, out of reach of children.
13. Maintain tools with care.
Keep cutting tools sharp and clean for better and
safer performance. Follow the instructions for maintenance and changing
accessories. Keep handles and switches dry, clean and free from oil and grease.
14. Have your tool repaired by a power tool repairer.
This power tool complies
with relevant safety requirements. To avoid danger, electrical appliances must
only be repaired by qualified technicians using original spare parts; otherwise
this may result in considerable danger to the user.
15. Users.
This appliance is not intended for use by young children or infirmed
persons without supervision.
Young children should be supervised to ensure that they do not play with
this appliance.
16. Replacement of the supply cord.
If the supply cord is damaged, it must be
replaced by a power tool repairer in order to avoid a hazard.
17. Connect dust extraction equipment.
If devices are provided for the
connection of dust extraction and collection facilities, ensure that these are
connected and properly used.
18. Store idle tools.
When not in use, tools should be stored in a dry, locked up or
high place, out of reach of children.
19. Maintain tools with care.
Keep tools clean and in good condition for better
and safer performance. Follow the instructions for maintenance and changing
accessories. Keep handles and switches dry, clean and free from oil and grease.
4
GENERAL (cont.)
