14
PREPARATION & SET-UP (cont).
Assembling the shoulder strap
1. Hook the shoulder strap (9) onto the
shoulder strap bracket (5) (Fig. 5)
2. Adjust the shoulder strap (9) to a length
that is suitable to you.
Fig. 5
Assembling of safety guards
Note:
Line Trimmer & Brush Cutter use the same
shaft.
1. Using a Phillips head screwdriver attach the
safety guard (7) (for brush cutter use) to lower
shaft head (Fig. 6).
Fig. 6
2. Attach the safety guard extension (8) (for line
trimmer use) to the fitted safety guard (7)
and secure using a phillips head screwdriver
(Fig. 7)
Fig. 7
Assembling of spool set (13)
1. Align the hole in the inner flange (14) with the
hole in the gear box housing and insert assem-
bly pin (18). While holding the assembly pin
(18) screw the spool set (13) onto shaft, turning
counter clockwise (Fig. 8).
2. Continue turning counter clockwise (Left-hand
thread) with the large open-end spanner (20)
until tight (Fig. 9).
Note:
Remove assembly pin (18) once the spool
set (13) has been assembled.
Fig. 8
Fig. 9
WARNING!
Do not operate the line
trimmer without safety guard extension (8).
