![background image](http://html1.mh-extra.com/html/ozito/hvr-006/hvr-006_instruction-manual_1666870008.webp)
7
IMPORTANT: Do not use the shed vac to pick up sharp objects or flammable
objects such as lit matches, hot ash, or cigarettes.
Do not use the shed vac to absorb flammable liquids such as chemical cleaners,
petrol or other flammable liquids.
Do not let any part of the shed vac, except the nozzle end, come into contact
with water.
After each use, properly clean the filter and transparent debris container.
Always switch off the shed vac before charging.
The shed vac has been shipped in a low charge condition. You should charge it prior
to use.
To Charge the Shed Vac
1. Place the charging stand (8) on a flat surface.
2. Locate the recharging hole at the rear of the handle and insert it into the power
outlet in the charging stand (8).
3. Plug the charger (7) into a power outlet. The LED charging indicator (6) will light up
indicating that the shed vac is charging.
4. You can store your shed vac on charge when not in use. The initial charge will take
10-12 hours.
Note:
The LED charging indicator (6) will not turn off once the Shed Vac is fully charged.
Note:
If light on the charger cradle fails to come on.
•
Check the charger (7) is securely plugged into the wall outlet and is switched on.
•
Check the shed vac is firmly seated on the charging stand (8).
To Remove the Shed Vac from Charge
When you need to use your shed vac, turn the power off at the powerpoint and gently
remove the shed vac from the charging stand (8) by lifting up and off the charging
stand (8).
When using your shed vac, never allow the transparent debris container (1) to fill over
maximum capacity. When storing, ensure no debris is left in the transparent debris
container (1).
Switching On and Off
To start the shed vac, slide the On/Off Switch (5) forward to On.
To stop the shed vac, slide the On/Off Switch (5) backward to Off.
Optimising Vacuum Performance
Vacuuming Dry Matter
In order to maintain the highest suction force, keep filter cartridge (2) clean at all times.
Allow the shed vac to suck the required dust and debris from the surface at a steady
speed. Forcing the vacuum to move too fast over the dust and debris will clog the
nozzle of the transparent debris container (1).
When operating the shed vac, ensure it is used for the specified purpose.
OPERATION