14
MAINTENANCE
WARNING!
Disconnect the mower from the power supply and ensure
the blade has stopped coasting before removing and fitting the blade.
Removing the blade (Fig. 11)
CAUTION:
ALWAYS HANDLE THE BLADE WITH
CARE – SHARP EDGES COULD CAUSE SERIOUS
INJURY.
USE GLOVES.
1. To remove the blade bolt, hold the blade firmly
and with a 13mm spanner (not supplied) loosen
the blade bolt by turning it anti-clockwise.
2. Remove the blade bolt, and blade.
3. Inspect for damage and clean as necessary.
Renew the metal blade after 50 hours mowing
or 2 years whichever is the sooner – regardless
of condition. If the blade is cracked or damaged
replace it with a new one. Never use a blade
bolt if the insulated head is damaged, cracked
or missing.
Fitting the Blade
1. Fit the blade to the fan with the tilt edges of the blade facing towards the
mower, ensuring the blade is located onto the fan location points correctly.
2. Re-assemble blade bolt through blade and fan.
3. Hold the fan firmly and tighten blade bolt with a 13mm spanner, by turning in
a clockwise direction. Do not over tighten.
Note:
Keep all nuts, bolts and screws tight to be sure the lawn mower is in a safe
working condition.
•
Check the catcher frequently for wear or deterioration.
•
Replace worn or damaged parts for safety.
•
Only use the replacement blade, blade bolt, and impeller specified for this
product.
•
Be careful during adjustments of the lawn mower to prevent entrapment of
the fingers between moving blade and fixed parts of the machine.
•
Oil the wheel pins.
•
Store the lawn mower in a dry place.
•
Frequently check the wheel threads are firm and tight.
!!
Fig. 11
Blade Bolt
Blade
Содержание ELM-300
Страница 1: ......
