2. FITTING ACCESSORIES CONT.
3. LOCK ON SLIDE SWITCH
4. To release the lock on facility, push down on the rear of
the switch.
OPERATION
The tool is recommended for use with a residual current
device with a rated residual current of 30mA or less.
5. While holding
the spindle lock
spanner in place,
tighten collet nut
with collet nut
spanner.
1. To turn the straigt grinder on, push the switch forward.
a
b
NOTE:
INSPECT THE ACCESSORY BEFORE
FITMENT TO ENSURE IT IS NOT DAMAGED OR
DEFORMED.
6. Pull on the
accessory to
ensure it is
properly secured.
Removing Accessories
1. Fit spindle lock spanner
and the collet nut
spanner.
2. Loosen the collet nut just
past the point of resistance.
3. Pull the accessory out of the collet.
3. To lock on for continuous use, push the switch forward (a)
and press down on the front of the switch (b).
2. To turn off, release the switch.
