SET-UP AND ADJUSTMENTS (cont.)
Retractable Safety Guard
The retractable safety guard (9) provides protection from
both sides of the blade (10). It retracts over the upper fixed
blade guard as the saw is lowered into the workpiece (Fig. 7).
Dust Bag
The dust bag (1) fits over the dust extraction port (2).
1. Squeeze the dust bag clamp (3) and place the opened
hole over the dust extraction port (2) (Fig. 8).
Release the dust bag clamp (3).
Side Support Bars
When working with long workpieces, the side support bars (20) provide additional
support to the workpiece during the cutting operation.
1. Insert a side support bar
(19) into the two holes
located on the side of the
base (18) (Fig. 9). Ensure
they are fully inserted and
located in the support
holes under the base (18)
(Fig. 10).
2. To secure the side support bar (19) tighten the side
support bar lock knob (20) by turning in a clockwise
direction (Fig. 11).
3. Repeat for the opposite side.
Rear Support Bar
The rear support bar provides additional stability for the mitre saw base.
1. Loosen the Phillips head screw on
the base of the mitre saw (Fig. 12).
2. Insert the rear support bar (22)
through the 2 holes at the rear of
the mitre saw (Fig. 13).
3. Tighten the Phillips head screw to
secure the rear support bar.
Fig. 7
Fig. 8
Fig. 9
Fig. 13
Fig. 11
Fig. 10
10
Fig. 12
