CHL-1800
4. FUNCTIONS
5. DRILLING
Before starting to drill, perform a few simple checks.
3 Secure the material to be drilled in a vice or clamp to stop it turning
whilst drilling.
1 Depress and release the
variable speed trigger to
ensure it is not locked on.
4 Hold the drill firmly and place
the bit at the point to be drilled.
2 Check the forward/reverse
lever is on desired setting.
5 Depress the variable speed
trigger to start the drill.
6 Move the drill bit into the workpiece.
Note:
Do not force the drill or apply side pressure to elongate the hole.
Let the drill do all the work.
FWD
REV
Drilling
Hammer Drilling
Screwdriving to a Pre-set Depth
1 To drill into wood, metal or
plastic, turn the function collar
to the align the arrow on the
housing with the drill icon.
1 To drill into concrete, brick
or other masonry, turn the
function collar to the align the
arrow on the housing with the
hammer icon.
2 Set the torque collar to lowest
setting and tighten the first
screw.
3 Repeat until you reach the
correct setting/ screw depth.
Use this setting for the
remaining screws.
2 If the clutch
rachets and
makes a clicking
sound before
screw is flush,
increase the
torque setting
and continue
tightening.
