ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Keyless Chuck
2 Torque Adjustment Collar
3 LED Worklight
4 Battery Release Button
5 On/Off Trigger
6 Forward/Reverse Lever
7 Battery
8 Gear Switch
CORDLESS HAMMER DRILL
KNOW YOUR PRODUCT
1. BATTERY & CHARGING
9 Charging Cradle
10 Charging Adaptor
11 Charging Jack
12 Belt Clip
ACCESSORIES
SETUP & PREPARATION
Note:
Once fully charged, the green light only will be illuminated.
WARNING!
THE POWER SUPPLY FOR THIS CHARGER IS
RECOMMENDED FOR USE WITH A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
Installing the Battery Pack
Removing the Battery Pack
Charging the Battery
1 Hold down the battery release
button.
1 Plug charging jack into
charging cradle. The green
light only will illuminate when
connected.
2 Slide the battery onto the
charging cradle. Both lights
will illuminate when battery is
properly connected.
1 Slide the battery
into the drill base
until it clicks into
place.
2 Slide the battery
out.
1 2
3 4
5
6
7
8
9
10 11
12
