2. ASSEMBLY
3. CONTROLS
OPERATION
Attaching Accessories
Changing Sand Paper
1. Align paper to pad and
press firmly to attach.
2. Carefuly peepl paper off pad
from on of the corners.
1. Place accessory
over the drive
spindle and
position to suit
angle needed
for application.
Note: Ensure the accessory is sitting flat on spindle and locking
pins.
2. Place flat side of
accessory fitting
washer on the
accessory then insert
locking bolt.
3. Tighten locking
bolt with provided
hex key.
1. Loosen locking bolt with
hex key.
2. Remove bolt and accessory.
Accessory Removal
2. To turn off, slide the
switch backwards.
1. To turn on, slide the
on/ off switch forward.
On / Off Switch
Rotating Base
The multi function tool comes with a rotating base. This can
be helpful when trying to get into hard to reach places.
1. While holding the
body of the multi
function tool, rotate
the base clockwise or
anti-clockwise to the
desired position.
