MAINTENANCE
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
TROUBLESHOOTING
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
• Keep the ventilation vents of the staple gun clean at all times, if possible,
prevent foreign matter from entering the vents.
• If the enclosure of the staple gun requires cleaning, do not use solvents but
a moist soft cloth only. Never let any liquid get inside the staple gun; never
immerse any part of the staple gun into a liquid.
•
Oil after each use.
This will reduce corrosion of the staple gun and ensure tool
longevity.
Staple gun does not fire
Check that the trigger lock-off is not preventing the trigger from being pressed. If
the trigger lock-off is out of the way and the gun still does not fire, you may have a
jammed staple. Follow the instruction in this manual to remove the jam.
Ensure sufficient air pressure (within 70-120PSI)
The magazine will not close
The magazine catch may not be sliding out of the way, simply hold down the
magazine release lever and slide the magazine in. Ensure that the magazine is
secure.
The magazine chamber may be over capacity. Remove some nails/ staples then
try to close the magazine again.
Spare parts can be ordered from the Special Orders desk
at your local bunnings Warehouse.
for further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
Warning
Read instruction
manual
Wear eye protection
No load speed
Wear ear protection
Revolutions or recipro-
caton per minute
/min
n
o
