background image

Building the Trampoline & Retaining Wall

Installation Time

You will need two people to assemble the trampoline and wall. The time needed is about half an hr.

You will need:

 

•   Cross-head screwdriver or electric drill (for attaching the retaining wall panels). 

 

•   Safety goggles and gloves (for attaching the springs).

Frame Assembly - 14ft x 10ft

Lay out the frame as pictured below (11ft x 8ft on next page) with the spring holes facing upwards. Push all 

sections together ensuring they’re all fully connected. Note that the long sides of the frame will appear to bow 

outwards (this is the design). When the springs are attached, the frame will pull inwards but the frame will 

always have a slight outwards bow.

5

Frame Layout - 14ft (4.25m) x 10ft (3m)

6

Frame Assembly - 11ft x 8ft

Middle Section Socket - Socket

Middle Section Plug - Socket

Middle Section Plug - Socket

Middle Section Socket - Socket

Corner Section Right

Corner Section Left

Corner Section Left

Corner Section Right

Middle Section Long Side

Middle Section Long Side

Frame Layout - 11ft (3.35m) x 8ft (2.45m)

Middle Section  

Plug - Socket

Middle Section  

Socket - Socket

Corner Section  

Plug - Socket

Corner Section  

Plug - Socket

Corner Section  

Plug - Plug

Corner Section  

Plug - Plug

Middle Section  

Socket - Socket

Middle Section  

Plug - Socket

Содержание Rectangular In-Ground Trampoline










Отзывы: